| 2014 | Degradation of thermal postbuckling behaviors of functionally graded material in aero-hygrothermal environments | Composite Structure | 이창열, 김지환 |
| 2014 | Thermal stability characteristics and limit cycle oscillation of smart skin structures | Journal of Thermal Stresses | 이창열, 김지환 |
| 2015 | Aero-hygrothermal effects on stability regions for functionally graded panels | Composite Structures | 이창열, 김지환 |
| 2015 | Evaluation of homogenized effective properties for FGM panels in aero-thermal environments | Composite Structures | 이창열, 김지환 |
| 2017 | Minimum-energy spacecraft intercept on non-coplanar elliptical orbits using genetic algorithms | International Journal of Aeronautical and Space Sciences | Snyoll Oghim, 이창열, Henzeh Leeghim |
| 2017 | Vibration-robust attitude and heading reference system using windowed measurement error covariance | International Journal of Aeronautical and Space Sciences | 김종명, 목성훈, Henzeh Leeghim, 이창열 |
| 2018 | Angular Rate and Alignment Estimation for Gyroless Spacecraft by Only Star Trackers | International Journal of Control Automation and Systems | Henzeh Leeghim, 방효충, 이창열 |
| 2018 | EHD Ink Jet Printing 기술을 이용한 Conductive Particle의 전기전도도에 미치는 영향 | 항공우주시스템공학회지 | 안주훈, 이용찬, 최대산, 이창열 |
| 2019 | 위성체 근접 운용기법을 위한 스테레오 비전 알고리즘 | 공학기술논문지 | 조성은, 이창열 |
| 2019 | 전기수력학적 프린팅 기술을 이용한 Ag 미세회로의 굽힘 특성 | 항공우주시스템공학회지 | 이용찬, 안주훈, 이창열 |
| 2019 | 3D 프린터로 제작한 샌드위치 코어의 저온 환경 특성 연구 | 항공우주시스템공학회지 | 안주훈, 최주환, 홍승래, 이창열 |
| 2019 | Electrohydrodynamic Printing 기술을 적용한 미세 크랙 센서 메커니즘 | 공학기술논문지 | 김건영, 이창열 |
| 2019 | 온도 센서를 위한 스마트 페인트 제작 및 저항 특성 | 항공우주시스템공학회지 | 안주훈, 이창열 |
| 2020 | Micropatterning of metal-grid micro electro mechanical systems (MEMS) sensor for crack detection using electrohydrodynamic printing system | Journal of Nanoscience and Nanotechnology | 이용찬, Henzeh Leeghim, 이창열 |
| 2020 | Resistance characteristics and particle arrangement of smart paint for surface temperature sensor | Journal of Nanoscience and Nanotechnology | 안주훈, Henzeh Leeghim, 이창열 |
| 2020 | A singularity-free steering law of roof array of control moment gyros for agile spacecraft maneuver | International Journal of Control Automation and Systems | Henzeh Leeghim, 이창열, 진재현, 김동훈 |
| 2020 | Fracture surface of 3D printed honeycomb structures at low temperature environments | Journal of Nanoscience and Nanotechnology | 최주환, Henzeh Leeghim, 안주훈, 최대산, 이창열 |
| 2020 | Electrical evaluations of anisotropic conductive film manufactured by electrohydrodynamic ink jet printing technology | Organic Electronics | 안주훈, 최주환, 이창열 |
| 2020 | Estimation of Motion Performance of a Light Buoy Adoption Ecofriendly and Lightweight Materials in Waves | Journal of Marine Science and Engineering | 정세민, 손보훈, 이창열 |
| 2020 | Structural Colors Based on Amorphous Arrays with Solely of Silica Particles | Applied Sciences | 최대산, 최주환, 이창열 |
| 2020 | 성형작약 제트를 이용한 Ammonium DiNitramide (ADN) 단일추진제 추력기 성능 분석 | 공학기술논문지 | 엄태호, 김익태, 이창열 |
| 2020 | Active vibration suppression of stiffened composite panels with piezoelectric materials under blast loads | Applied Sciences | 이창열, 정진영, 정세민 |
| 2021 | Temperature-Sensing Inks Using Electrohydrodynamic Inkjet Printing Technology | Materials | 안주훈, 홍희주, 이창열 |
| 2021 | Active Flutter Suppression of Smart-Skin Antenna Structures with Piezoelectric Sensors and Actuators | Aerospace | 이창열, 김지환 |
| 2021 | Resistances of Carbon Black and Polymers in Smart Paints for Temperature Sensors | Journal of Nanoscience and Nanotechnology | 안주훈, 최대산, 이창열 |
| 2021 | Biomimetic Crack Sensors Using Electrohydrodynamic Technology | Journal of Nanoscience and Nanotechnology | 김건영, 정세민, 이창열 |
| 2021 | Biomimetic Structural Coloration Based on Spherical Silica Nanoparticles | Journal of Nanoscience and Nanotechnology | 최주환, 최대산, 안주훈, Henzeh Leeghim, 이창열 |
| 2021 | Sensing Characteristics of Improved Positive Temperature Coefficient Thermistors with Paint Forms | Journal of Nanoscience and Nanotechnology | 안주훈, 이창열 |
| 2021 | Flexible Structural Color Films Based on Electro-hydrodynamic Inkjet Printing | Coatings | 최주환, 안주훈, 이창열 |
| 2021 | Grid-type Sensors Using Resistance Change Ratio for Micro-crack Detection | Engineering Failure Analysis | 이용찬, 안주훈, 이창열 |
| 2021 | Temperature-Sensing Inks Using Electrohydrodynamic Inkjet Printing Technology | Materials | 안주훈, 홍희주, 이창열 |
| 2021 | Real-time Detection of Damage Evolution Using Electrohydrodynamic Printing | Engineering Failure Analysis | 김건영, 이창열 |
| 2022 | Weighted Moving Square-Based Solver for Unsteady Incompressible Laminar Flow Simulations | Applied Sciences | 정세민, 이창열 |
| 2022 | Electrohydrodynamic ink-jet printing characteristics of inks for temperature measurements | Materials Science & Engineering: B | 안주훈, 이창열, 정세민 |
| 2022 | Evaluation of Temperature Sensors for Detection of Heat Sources Using Additive Printing Method | Sensors | 안주훈, 김한나, 조진연, 김정호, 이창열 |
| 2023 | Optimized curing and coating of smart paints for surface temperature measurements | Journal of Coatings Technology and Research | 안주훈, 조진연, 김정호, 이창열 |
| 2023 | Crack detecting method based on grid-type sensing networks using electrical signals | Sensors | 안주훈, 이용찬, 정세민, 김한나, 이창열 |
| 2023 | Optimized curing and coating of smart paints for surface temperature measurements | Journal of Coatings Technology and Research | 안주훈, 조진연, 김정호, 이창열 |
| 2023 | Crack detecting method based on grid-type sensing networks using electrical signals | Sensors | 안주훈, 이용찬, 정세민, 김한나, 이창열 |
| 2023 | Thin-film temperature sensors with grid-type circuits for temperature distribution measurements | Sensors and Actuators: A. Physical | 안주훈, 김한나, 이창열 |
| 2023 | Coloration on Bluish Alginate Films with Amorphous Heterogeneity Thereof | Polymers | 양수연, 강동수, 이창열 |
| 2024 | 저온 환경에서 Re-entrant 허니콤
구조의 셀 배치에 따른 굽힘 하중 | 항공우주시스템공학회지 | 조성빈, 안주훈, 이준학, 이창열 |
